Model No.︰SPOT PP
Brand Name︰SPOT PP(BLACK / CLEAR)
Country of Origin︰Japan
Unit Price︰-
Minimum Order︰-
SPOT PP(BLACK / CLEAR) | ||||||||||||||||||||||||||||||||||||||||||
It is a surface treatment which can be also used
for the polypropylene product. This agent vanishes the gloss of the weld line and enbossing &frosting on the plastic product. |
||||||||||||||||||||||||||||||||||||||||||
1. Please spread Spot 50 on the surface of a plastic product thinly when the product becomes defective because of the Weld line etc.
|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
【Test conditions】
Spreading 'Spot 50' on the radical material of each resin → centigrade x compulsive dryness for 30 minutes at 50 degrees → at Leaving for one week → 30℃ in temperature/60%RH in humidity/Leaving for 24 hours → Externals and adhesion test. 【Criterion】 Externals:Not finding the abnormality of the swelling and peeling off. Stickiness:Not flaking off on cross cut test (make the 100 squares-2mm x 2mm and after the cellophane tape is made to stick, rapidly pull in the direction 45℃) |
||||||||||||||||||||||||||||||||||||||||||
【Result of Examination】
|
||||||||||||||||||||||||||||||||||||||||||
【Solvent-proof】
Lightly wipe off the surface of the above examination goods, with rag which soaks hexane or kerosene. → no abnormality. ※ The examination result is due to our factory standard. We will recommend the preliminary test beforehand, when you use this item. ※Occasionally it is easier to treat with the clear type even on the black product 【Net 420ml, 12cans in a box, 48cans in a carton】 |