SPOT 50(BLACK / CLEAR)

Model No.︰SPOT 50

Brand Name︰SPOT50

Country of Origin︰Japan

Unit Price︰-

Minimum Order︰-

Inquire Now

Product Description

SPOT 50(BLACK / CLEAR)

When the weld line and embossing & frosting on the plastic product glosses,this agent vanishes the luster,

1. Please spread Spot 50 on the surface of a plastic product thinly when the product becomes defective because of the Weld line etc.
2. Please spread Spot 50 on the plastic product and paint afterward, when there is a painting in the second processing and the Weld line doesn't disappear even if paints.
3. Please spread Spot 50 on the plastic product thinly, when the gloss comes out on frosting and embossed surface. It vanishes the gloss.
4. Please use the clear type on all the color products, however generally the black type on the black.

Suitable resin	ABS, AS, PC, Acryl, Hard vinyl chloride etc.
Unsuitable resin	PP, PE, PS, Soft vinyl chloride, thermosetting resin, Resin with strong solvent proof. ※For these resins, please try 'Spot PP'.

【Test conditions】　
Spreading 'Spot 50' on the radical material of each resin　→　 centigrade x compulsive dryness for 30 minutes at 50 degrees　→　at Leaving for one week　→　30℃ in temperature/60%RH in humidity/Leaving for 24 hours　→　Externals and adhesion test.
【Criterion】　
Externals：Not finding the abnormality of the swelling and peeling off.
Stickiness：Not flaking off on cross cut test (make the 100 squares-2mm x 2mm and after the cellophane tape is made to stick, rapidly pull in the direction 45℃)

【Result of Test】

Resin	Externals	Stickiness
ＡＢＳ	○	○
Ａcrylic	○	○
Ａ　Ｓ	○	○
Ｐ　Ｃ	○	○
Hard PVC	○	○

【Solvent-proof】
Lightly wipe off the surface of the above examination goods, with rag which soaks hexane or kerosene.　→　no abnormality.

※ The examination result is due to our factory standard. We will recommend the preliminary test beforehand, when you use this item

※Occasionally it is easier to treat with the clear type even on the black product
【Net 300ml, 12cans in a box, 48cans in a carton】